Microcom 438TM, Руководство оператора, Страница: 212 / 231

13-6 438TM Operator’s Manual - 880049-0113
^A ^D COMMAND
8 Cycle the cutter : This command makes the cutter cycle once.
11 Print Test Pattern : (Equivalent to ^K).
12 Print Blank Label : (Equivalent to ^L).
X 20 Set Bits Per Second:
0 110 bps
1 150 bps
2 300 bps
3 600 bps
4 1200 bps
5 2400 bps
6 4800 bps
7 9600 bps
8 19200 bps
9 38400 bps
10 57600 bps
11 115200 bps
12 230400 bps (only used for D149 Image Mode)
13 460800 bps (only used for D149 Image Mode)
14 921600 bps (only used for D149 Image Mode)
^AB ^D COMMAND
21 Software Bank Switch #1: A non-volatile command used to set the various
functions identified below.
^AB12345678
Position:
12 Enquiry Responses:
00 = Control Codes
10 = Text Equivalent
3 1 = Ignore Control Codes; 0 = Accept
4 1 = Odd Parity; 0 = Even Parity
5 1 = Disable Parity (NONE); 0 = Enable Parity
6 1 = Enable Echo; 0 = Disable
7 1 = 8 Data Bits; 0 = 7 Data Bits
8 Reserved
22 Software Bank Switch #2: A non-volatile command used to set the various
functions identified below.
^AB12345678
Position:
1
1 = Enable Clear Text; 0 = Disable
2 1 = Enable >RESTARTED< Response; 0 = Disable
3 1 = Disable Button; 0 = Enable
4 1 = Enable Print Repetition; 0 = Enable Form Feed
5 1 = Use Saved Format File; 0 = ROM Format