Microcom 428T, Руководство оператора

Страница: 115 / 249

Chapter 5 Printer Commands
428T Operator’s Manual - 880037-0140 5-41
When stock is initially loaded the printer will do an auto header to determine
the correct header parameters. After this, when stock is loaded, the printer will
just advance the stock to the correct printing position wasting the first label
unless stock is loaded after a stock out condition. Then the printer will pull the
stock in and print on the first label and clear the error.
^A ^D COMMAND
0 147 Execute AutoHeader on power-up only.
1 Execute AutoHeader on the next media loading.
2 Execute AutoHeader immediately (after delay, assumes that media is loaded.
3 Execute AutoHeader every time media is loaded.
1 148 Show Autoheader Values Command: After the auto header has been
executed, the values that the printer will use for the header may be seen using
the command ^D148 which will be in the form:
HFM = 24
LSX = 832
LSY = 382
WEB = 0
GAP = 25
DPS = 6
LCB = 3
AGD = 1
SPG = 52
OFX = 0
OFY = 0
D91 = 125
b = 594
The HFM parameter will show the value that is provided in the format that
was last loaded in the printer which will initially be the power up format.
5.5 AutoLoad Media Commands
The printer provides an easy way for new media to be loaded into the printer thru the use of
the AutoLoad function. When this feature is turned ON, the printer will sense the presence
of new media as the operator is pushing it into the printer, automatically feeding the media
into the printer, and then registering the media using either a TOF sensor or a Form Feed.
There are two types of AutoLoad:
Au Form Feed
Au Top-of-Form.
Refer to Section 5.2.1.5 for details on how Soft Switch #5 (^D25) controls the AutoLoad
function.