Microcom 428T, Руководство оператора

Страница: 168 / 249

Bar Codes Chapter 8
8-16 428T Operator’s Manual - 880037-0141
Symbol Size
Numeric
Capacity
Alphanumeric
Capacity
Binary Byte
Capacity
120 x 120 2100 1573 1048
132 x 132 2608 1954 1302
144 x 144 3116 2335 1556
8 x 18 10 6 3
8 x 32 20 13 8
12 x 26 32 22 14
12 x 36 44 31 20
16 x 36 64 46 30
16 x 48 98 72 47
Table 8-5 Data Matrix Configuration Parameters
Encoding Schemes - A
See below for entire list. Values may be entered as upper or lower case.
Data
Data to be converted to 2D Data Matrix Barcode, maximum number of characters supported
in the printer implementation is 1000.
Encoding
The Encoding parameter is used to set the encoding scheme that will be used for the
supplied data. The printer default is set to “Auto”, which will automatically switch to the most
efficient encoding scheme for the data provided. Consult the Aim International Technical
Specification for Data Matrix ECC 200 requirements for additional information.
Encoding
Scheme
Characters
Bits per
Character
A- ASCII
Double digit numeric
ACSII values 0 – 127
Extended ASCII values 128-255
4
8
16
C- C40 Primarily Uppercase Alphanumeric 5.33
T- Text Primarily Lowercase Alphanumeric 5.33
B- Base256 All byte values 0 – 255 8
X- X12 Similar to C40 5.33