Microchip Technology MPLAB ICE, Руководство пользователя

Страница: 64 / 192

MPLAB
®
ICE User’s Guide
DS51159B-page 64

2001 Microchip Technology Inc.
3.5.4 Other Tabs
No other tabs need to be edited. However, you may wish to view them to
familiarize yourself with the options available on them.
• Power tab: Displays system power information. The default is Proces-
sor Power From Emulator.
• Clock tab: Displays oscillator type and frequency information. The
default is the on-board clock with Oscillator Type as LP and Desired
Frequency as 4.0 MHz.
• Memory tab: Use this tab to set the memory configuration being used
and to enable/disable long writes. The default is all memory from the
emulator and long writes enabled. Memory configuration is not avail-
able for the selected processor.
• Configuration tab: Use this tab to set up the Watchdog Timer and/or
Processor Mode, (i.e., internal and external memory). The defaults are
Watch Dog Timer disabled (None) and Microcontroller Processor Mode
(internal memory). Processor Mode selection is not available for the
selected processor.
• Pins tab: Use this tab to set up pins. You may enable/disable master
clear (MCLR), MUX CCP2 with RB3 and/or enable/disable the OSC
switch. MCLR enable/disable is not available for the selected proces-
sor.
When you are through, click OK to accept the setting and close the
Development Mode dialog.
3.6 Creating a Project
The best way to develop an application using MPLAB IDE software is to
create a project. In this tutorial, you are going to create a project named
icetut18.pjt.
Before doing this, however, you should create a folder
called
icetut18
in which to place the new project. Also, you should copy the
file
icetut18.asm
from the MPLAB install directory to this project directory
to keep all project files in one place.