Microchip Technology MPLAB ICE, Руководство пользователя

Страница: 155 / 192


2001 Microchip Technology Inc. DS51159B-page 155
Debugging Techniques
Select Halt on Trigger and then click Apply or OK.
Connect the logic probes to the appropriate port pins. For example, if you are
triggering on Port B outputs, connect probe EXT0 to RB0, EXT1 to RB1, etc.
Reset the system (Debug>System Reset) and then run your program
(Debug>Run>Run or green stoplight icon on toolbar). After it halts, bring up
the Trace Memory Window (Window>Trace Memory).
View the executed code to debug your program.
Solution B: Trigger In
To clear all break, trace and trigger points, select Debug>Clear All Points.
Select Debug>Trigger In/Out Settings to open the Trigger In/Out Settings
dialog.
Figure A.18: Trigger In for Logic Probes
Select Enable break on external trigger input and then select either Rising
edge or Falling edge. If you want the trace buffer to freeze on a rising edge of
the trigger input, select that option as well. Click OK.
Connect the trigger input (TRIGIN) probe to the appropriate output. For
example, if an incorrect output corresponded with Port B pin RB2 going high,
you would connect TRIGIN to RB2.
Reset the system (Debug>System Reset) and then run your program
(Debug>Run>Run or green stoplight icon on toolbar). After it halts, bring up
the Trace Memory Window (Window>Trace Memory).
View the executed code to debug your program.
A.4.6 Number of loop executions
An application loop must be executed a number of times. How do you
determine if the loop executed that many times?
You can use the pass counter to determine if a loop is executed a specific
number of times.
To clear all break, trace and trigger points, select Debug>Clear All Points.