Microchip Technology MPLAB ICE, Руководство пользователя

Страница: 11 / 192


2001 Microchip Technology Inc. DS51159B-page 11
Quick Start
• Connect the logic probes.
Plug the logic probes into the logic probe connector found on the front of
the emulator pod.
• Install the processor module.
Insert the processor module firmly into the front of the MPLAB ICE pod.
To remove the processor module, place one finger behind each tab on
the front of the processor module and pull firmly. DO NOT pull on the
cable.
• Attach the power supply.
Make certain that the MPLAB ICE pod on/off switch is in the “O” or “off”
position before completing this step. Plug the appropriate ends of the
power supply into a power outlet and into the back of the MPLAB ICE
pod.
• If using a target board with the MPLAB ICE system, install the
device adapter.
Attach the device adapter to the end of the cable on the processor
module. Then, plug the device adapter into a transition socket on the tar-
get board.
• Turn on the system components.
To prevent damage to any of the subsystem or target application parts,
power up the system components in the following sequence:
1. Turn on the PC.
2. Turn on the emulator assembly by pushing the emulator pod switch
to ‘I’.
3. Apply power to the target application circuit.
Turn the system components off in reverse order.