micro-trak MT-3405F II, Справочное руководство

Страница: 35 / 62

35
Implement Wheels
1. Secure magnets mechanically or with epoxy.
2. Rigidly mount sensor mounting bracket to the wheel
assembly. Cut or bend “L” bracket as required for proper
positioning of sensor.
3. Install sensor, adjust to correct spacing (1/4” to 1/2 “
or 6 to 13 mm is recommended), and secure with 3/8”
locking nuts. See Illustration at right.
Front Tractor Wheel
1. Magnets may also be secured with a cable tie and an
adhesive such as epoxy.
2. Mount the speed sensor bracket to a part of the wheel
assembly that does not change position to the hub
FABRICATED BRACKET
Sensor
3/8” nut
Optional section
of hose to
protect cable
3/8” nut
3/8” hole
for sensor
Appendix A - Speed Sensor Installation
Speed Sensor
and Bracket
¼” Bolts,
Lockwashers
and Nuts
Speed Sensor
Cable Tie
Cable Tie
Speed Sensor
Tap thread for
bolts or weld
Hub
Top View
ATV Wheels
Two mounting examples are illustrated:
1. Using one cable tie (ribbed side toward magnets), secure
two magnets to the wheel hub so they are exactly
opposite each other. Alternate the magnets’ polarities.
when the wheels are turned. If the “L” bracket provided
cannot be bent and mounted to properly position the
sensor, make a bracket similar to the one shown at right.
3. Install sensor, adjust to correct spacing (1/4” to 1/2 “
or 6 to 13 mm is recommended), and secure with 3/8”
locking nuts.
Sensor Bracket
Axle
Nut
Swing Arm
Hub
Rim
Plastic
Cable
Tie
Magnet
Cut Bracket
to Clear Rim
Cut and Bend
Bracket as
Required
Metal
Hose
Clamps
Fork
Tube
Axle
Hub
Rim
Magnet
2. Cut and bend sensor mounting bracket as needed and
rigidly mount.
3. Insert sensor, adjust spacing (1/4” to 1/2” or 6 to 13 mm)
and secure with 3/8” locking nuts.
CAUTION: Make sure valve stem cannot make contact
with sensor or bracket.