21
TROUBLESHOOTING ENGINE and BOOSTER PUMP
THE ENGINE DOES NOT START
The machine does not have water pressure. The flow safety switch will not allow the engine to start with water running
through the machine.
A closed shut-off valve.
Solution- Make sure the handle is in the up position (open) for
operation (Fig.1)
Flow switch is malfunctioning.
Solution- Remove switch and check contacts and wiring. Replace if
necessary. (Fig. 2)
Check oil level. If oil level is below required level, the engine will not start.
Check to be sure fuel is getting to the engine. Open the carbuerator drain to check for fuel.
PUMP IS LEAKING
Replace the mechanical seal inside the pump.
PUMP IS NOT BUILDING PRESSURE
Check the impeller in the pump. It could be clogged or broken.
orbidden ses
WARNING
DO NOT USE THIS MACHINE IN
A NON-VENTILATED AREA
1. Do not use this machine with solids, waste, etc. This machine is designed only for use in clean water applications.
2. Do not use in high risk areas for explosives.
3. Do not use in enclosed areas.
OPERATION AND MAINTENANCE
1. Check oil level prior to each operation, and change oil as recommended (Refer to Honda Owners Manual).
2. Follow environmental regulations when disposing of old parts or oil.
3. Regular maintenance and repairs must be performed by a trained professional operator.
4. Any and all repairs and maintenance must be performed when the engine is turned off and cooled down.
FIRE EMERGENCY
1. In case of fire use a powder fire extinguisher.
BATTERY INSTRUCTIONS AND USE
1. The electrolyte is a diluted sulfuric acid solution. In case of contact with skin, wash immediately!! Contact medical help
immediately if solution gets in your eyes.
WARNING!!
When recharging any battery, a flammable gas is produced which
could cause battery to explode.
2. Avoid sparks when attaching or charging battery. Verify correct cable placement. Verify that battery cables are placed correctly
when recharging the battery ( + with +, - with - ). Keep away from matches, cigarettes or any flammable objects. Do not rest
metal tools on the battery.
3. Keep children away from the battery! Periodically verify the battery charge. During the off season, remove the battery and
keep it in a warm, dry location and recharge as necessary.
WARNINGS FOR POTENTIAL RISKS
1.
WARNING!!
Never exceed the maximum operating pressure of 120 PSI. Monitor the pressure gauge on the
machine inlet. Extreme high pressure may cause product failure and result in serious injury.
2.
WARNING!!
During operation of machine, stay away from parts which experience high temperature such as the
muffler, manifold, etc., which may burn or cause serious injury.
3.
WARNING!!
Do not get close to moving parts nor high temperature parts to avoid danger or serious injury.
Figure 1
Figure 2
Содержание MR43
Страница 1: ......