Page 22
Operation
thermoIMAGER NetPCQ
6.6
Connection to the thermoIMAGER TIM NetPC
The communication with the TIM NetPCQ is done via the TCP/ IP protocol (Transmission Control Protocol/
Internet Protocol). The TIM NetPCQ can get its IP address (Internet Protocol address) either from a DHCP
server or it can work with a fixed IP address.
First switch on the thermoIMAGER NetPCQ
On a direct connection to a PC both, the thermoIMAGER TIM NetPCQ as well as the PC must use a fixed IP
address because no DHCP server is available here. The thermoIMAGER TIM NetPCQ is using in this case the
IP address 192.168.0.100.
On your PC you have to do the following settings once (depending on the operating system the procedure
can differ from the here shown – the following description refers to a Windows 10 system).
1. Go to
System controls > Network > Internet
and
open
Network and Sharing Cen-
ter.
2. If you have an existing connection to a network (company network e.g.) you should see the following
information:
Fig. 12 Network center
If your PC is not connected to any network, please go to
Change adapter settings
after you
opened the
Network and Sharing Center
. Now go to
Local Area Connection
and
right
mouse button:
Properties,
continue at item 4.
3. Go to
Local Area Connection
- a status view according
will be shown. Then go to
Properties
.
