MICRO-EPSILON thermoIMAGER TIM NetPCQ, Руководство по эксплуатации

Страница: 27 / 46

Page 27
Operation
thermoIMAGER NetPCQ
6.7 Ethernet Network Communication
Please connect your thermoIMAGER TIM with the supplied USB connection cable with the thermoIMAGER TIM NetPCQ.
Please connect the Ethernet connection of the thermoIMAGER TIM NetPCQ with a network or internet (via a router e.g.).
Now connect the power supply to the thermoIMAGER TIM NetPCQ and to the mains. The thermoIMAGER TIM NetPCQ will start
to boot the system and should be ready to use after 2 - 3 minutes.
Fig. 21 Ethernet network connection / TIM NetPCQ powered via power supply
If the TIM NetPCQ is used in a network it gets its IP address from a DHCP server. In order to find the thermoIMAGER TIM NetPCQ in
the thermoIMAGER TIM Connect of your local PC the address range of the local network must be known.
Thereto please open the Network and Sharing Center on your local PC, go to Local Area connection , see Fig. 22 and open
Details
, see Fig. 23.
The Window Network Connection Details , see Fig. 24, shows now your own IPv4 address.
Please start now the thermoIMAGER TIMConnect on your local PC and open the menu
Tools > Extended > Remote de-
vices ....
In the window which opens , see Fig. 25, set a hook on
Enable
and enter the address range of your local network under
Detect
devices .
The fourth block should have the range 0 to 255.