Page 24
Operation
thermoIMAGER NetPCQ
Fig. 16 Internet Protocol Version 4 (TCO/IPv4) - User configured IP address
After you have made these settings and connected your PC with the thermoIMAGER TIM NetPCQ using an
Ethernet cable your PC will establish a point-to-point connection. This procedure can take several minutes.
In the Network and Sharing Center your network will now be shown up as a non-identified network.
Please start now the thermoIMAGER TIM Connect on your PC and open the menu item
Tools/ Ex-
tended/ Remote devices....
In the window which is appearing
you should set a hook on
Enable
and enter the IP
address of thermoIMAGER TIM NetPCQ (192.168.0.100)
at
IP adress of current remote de-
vice.
Press
OK
.
The software will establish a connection to the remote device thermoIMAGER NetPCQ automatically.
