Page 84
Appendix | Software
induSENSOR DTD / MSC7xxx
Fig. 77 View 3 Zero-point adjustment
The entire measuring range is now symmetrically arranged around the zero point.
i
Optionally, you can enter the associated millimeter values which can be found under
Measurement
and the additional designation
Custom
1
.
The chart is divided into 3 areas:
Green
Taught-in range, limited by
X
0
,
X
2
and the associated output signals.
White
Usable range outside the taught-in range
Red
Unavailable range
1) Sensor designation, e.g., DTA-3G8 Custom