MICRO-EPSILON ILD 1320-10 Скачать руководство пользователя страница 11

Страница: 11 / 108

Page 11

Safety

optoNCDT 1320

1.4

Proper Use

- The optoNCDT 1320 system is designed for use in industrial and laboratory areas.
- It is used

for measuring displacement, distance, position and thickness

for in-process quality control and dimensional testing

- The sensor may only be operated within the limits specified in the technical data, see Chap.

3.3

- Use the sensor in such a way that in case of malfunctions or failure personnel or machinery are not endan-

gered.

- Take additional precautions for safety and damage prevention for safety-related applications.

1.5

Proper Environment

- Protection class: IP 65 (applies only when the sensor cable is plugged in)

Lenses are excluded from protection class. Contamination of the lenses leads to impairment or failure of the
function.

- Operating temperature:

0 °C ... 50 °C (+32 up to +104 °F)

- Storage temperature:

-20 °C ... 70 °C (-4 up to +158 °F)

- Humidity:

5 - 95 % (non-condensing)

- Ambient pressure:

Atmospheric pressure

The protection class is limited to water, no penetrating liquids or similar!

Содержание ILD 1320-10













































































































Результаты поиска

Содержание ILD 1320-10

Отзывы:

Похожие инструкции для ILD 1320-10

Бренды по названию

Популярные бренды

MICRO-EPSILON ILD 1320-10, Инструкция по эксплуатации

Результаты поиска

Содержание ILD 1320-10

Отзывы:

Похожие инструкции для ILD 1320-10

Бренды по названию

Популярные бренды