manualshive.com logo in svg

MICRO-EPSILON colorSENSOR CFO Series, Инструкция по эксплуатации

Поделиться
Скачать
MICRO-EPSILON colorSENSOR CFO Series Скачать руководство пользователя страница 85

Page 85

Operation

colorSENSOR CFO

5.8 

Factory Reset

A factory reset can be accomplished as follows:

  Disconnect the sensor from the power supply.
  Hold the 

INT

 and 

ESC

 keys depressed.

Avoid pressing any other keys during this procedure. Otherwise the process can become stuck in an unde-
fined state.

 

> Damage to sensor 

  Switch the power supply back on.
  Release the keys.

The sensor then starts to reset to the factory default settings. During this operation all sensor settings as well 
as all firmware updates performed in the meantime are discarded. Resetting requires approx. 5 minutes. 
In the event of an error, e.g. interruption in power supply, the reset is continued during the next restart. No 
sensor states are signaled and no entries are possible during the reset operation. Pressing a key is acknowl-
edged by error flashing (3x100 / 300 ms).

Indicators 

Output LEDs: 

Pulsating progress bar (indeterminate progress bar) 

Key LEDs: 

Not illuminated 

Power-LED: 

Illuminated continuously 

Key lock LED: 

Illuminated continuously

NOTICE

Содержание colorSENSOR CFO Series





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды