MICRO-EPSILON colorSENSOR CFO Series Скачать руководство пользователя страница 7

Страница: 7 / 124

Page 7

Safety

colorSENSOR CFO

Safety

The handling of the system assumes knowledge of the instruction manual.

1.1

Symbols Used

The following symbols are used in this instruction manual:

CAUTION

Indicates a hazardous situation which results in minor or moderate injuries if not
avoided.

NOTICE

Indicates a situation which results in property damage if not avoided.

Indicates a user action.

Indicates a user tip.

1.2

Warnings

Connect the power supply and the display/output device in accordance with the safety regulations for electri-
cal equipment.

> Danger of injury

> Damage to or destruction of sensor

The power supply must not exceed the specified limits.

> Danger of injury

> Damage to or destruction of sensor

Avoid shocks and impacts to the sensor.

> Damage to or destruction of sensor

Never fold the optical fiber and do not bend them in tight radii.

> Damage to or destruction of fiber optics, partial failure of the measuring device

Protect the ends of the optical fibers against contamination (use protective caps).

> Failure of the measuring device

CAUTION

NOTICE

Содержание colorSENSOR CFO Series





























































































































Результаты поиска

Содержание colorSENSOR CFO Series

Отзывы:

Бренды по названию

Популярные бренды

MICRO-EPSILON colorSENSOR CFO Series, Инструкция по эксплуатации

Результаты поиска

Содержание colorSENSOR CFO Series

Отзывы:

Бренды по названию

Популярные бренды