Mach 1, 3, 3+, 10, 15
6
©2018 Micro-Air
Rev 1.01
Identifying the wires
The blue arrow to the left points to
the top of the compressor. Three wires exit
this cap colored BLACK, WHITE, and RED
shown entering the electric box by the green
arrow.
Making the connections
Use only end splice connectors for connecting one wire to another. Wire nuts can come off in this high
vibration environment and automotive connectors are not rated for line voltage.
Brown wire
Follow the white wire from the compressor
into the electric box to the top of the run capacitor
as indicated by the green arrow in image 4.
Disconnect the white wire and cut off the connector
on the end. Strip about ½ inch (1.27cm) of
insulation from the white wire and from the
BROWN wire from EasyStart. Twist both wires
together and crimp them with and end splice
connector as shown in image 5.
Note:
Some installations will have multiple wires on the terminal group along with the white and yellow
wires shown in image 4. Be sure to follow the white wire from the compressor completely back to the
capacitor to be sure you have the correct wire.
Image 3
Image 4
Image 5
