Micro-Aide CWR-24E Скачать руководство пользователя страница 59

Страница: 59 / 108

hapter

5 – f

ront

aneL

peration

the

USb h

oSt

ort

icro

‑A

ide

cited previously. The up and down arrow keys can be used to scroll quickly through a large collection

of dates.

6. Press the

Enter

key after highlighting a date. The following message will be displayed briefly after the

delay required to create the text file.

Writing  events.txt
Writing  events.bin
Writing  setupdata
      Success!

7. Records from additional complete days can be saved by repeating this procedure starting at step 3.

Remove the flash drive from the USB Host Port after all the required records have been saved.

aVing

Vent

eCorDS

froM

ange

iMeS

anD

ateS

Verify the USB flash drive is formatted FAT‑32, not NTFS.

Insert the USB flash drive into the connector of the USB Host Port.

3. Press the

Save / .

key. The following message will be displayed.

Save to flash drive:
Records for one day
Records for a range

Save Command

4. Press the

Enter

key after highlighting the Records for a range option.

5. A table of dates similar to the following will be displayed. The dates represent the available start date

of the range.

030313 030413 030513
030613 030713 030813
030913 031013

At least one Event Record will be logged for each date listed. Dates are listed in the MMDDYY format.

The Event Records option may list as many as 128 dates. Only eight dates are listed in the example

cited previously. The up and down arrow keys can be used to scroll quickly through a large collection

of dates.

6. Press the

Enter

key after highlighting a date. The following message will be displayed.

Start time:
Enter=edit, Esc=OK
00:00:00

To accept the 00:00:00 midnight setting as the start time, press the

Esc

key. To modify the start

time move the highlight to the hours, minutes or seconds position. Press the

Enter

key. Press the

number keys as required to create a new value. The VDL utilizes a military‑style clock. Accordingly,

12:01:02 AM is defined as 00:01:02 and 12:59:58 PM is defined as 23:59:58. Leading zeros are not

required. To accept the new value, press the

Esc

key. Using the same technique, adjust the other

values as required. When the start time is correct, press the

Esc

key.

Содержание CWR-24E













































































































Результаты поиска

Содержание CWR-24E

Отзывы:

Micro-Aide CWR-24E, Руководство пользователя, Страница: 59 / 108

Результаты поиска

Содержание CWR-24E

Отзывы: