Micom 3f, Руководство пользователя

Страница: 80 / 164

MICOM-3F/3T/3R HF-SSB Owner’s Guide
62
SELF Self call – call using the station’s own address, generally used for test purposes. 73
Transmitting AIICalls
An AllCall is a message which your radio uses to establish a connection with all the other stations
simultaneously, and is typically used to broadcast a message or send a distress call. An AllCall can also
include a message.
In addition to this type of AllCall (referred to as a
global (GL) AllCall
), it is also possible to use
selective (SL) AllCall : this is a simultaneous call addressed only to all the stations whose names
(addresses) end with a character you specify.
Note
If so required, you can set your radio so that it cannot send AIICalls.
You cannot select the channel on which an outgoing AllCall will be sent: outgoing AIICalls are sent on
the AllCall channel defined for the currently selected net, or on the best scanned channel of the net.
Note When radios in other nets have their MultiNet feature enabled, AIICalls may also
reach these radios. See details on page 41.
There are two ways to send a global AllCall: using the ESC key or using the CALL function. A selective
AllCall can be sent only using the CALL function.
➤
To send global AllCall using the ESC key:
1. Press ESC continuously for a few seconds. The radio starts
sending the GL AllCall.
During this process, you will see TO alternating with the
number of the channel on which the set up request is being
sent.
MICOM-3
STOP
TO
GL ALLCALL
MICOM-3
STOP
CH 2
GL ALLCALL
Note While the radio is initializing the link, you can press STOP (F1) or ESC to abort the
entire process.
2. After a delay, you will see LINK with a flashing GL ALLCALL.
MICOM-3
LINK
GL ALLCALL
3. Confirm the link set up by pressing ENTER or the PTT. The GL
ALLCALL message stops flashing, and you can start talking.
MICOM-3
PAGE
MON
LINK
GL ALLCALL
I
4. Press PAGE (F2) if you want to send a message. See page 60
for details.