Using Automatic Link Establishment (ALE)
59
Sending Messages
You can send messages (
page
) together with the initial call (before the link is set up), and also
whenever necessary while the link is already set up (that is, when your station is in a link with the
destination station).
In the link state, if you are making an individual call, both the receiving and the calling station can
send messages to the other station. This is also true for net calls and group calls.
➤
To transmit an individual call with a message:
1. Initiate a call as explained above (page 54 or 55) and select the
desired station.
MICOM-3
SEND
PAGE
CHAN
CALL
1009
I
2. Press
PAGE
(F2) to add a message. The last sent message is
displayed.
MICOM-3
SEND
EDIT
CHAN
AMD
5AM
3. You may now select a different (stored) message or edit this message:
•
Press the
UP
/
DOWN
keys to scroll to the required
message.
MICOM-3
SEND
EDIT
CHAN
<->
AMD11
11 AMD MESS
or
•
To edit the message, press
EDIT
(F2) and use the keypad to
enter a new message.
MICOM-3
SAVE
<--
-->
CLR
AMD
5AM
4. Press
SAVE
(F1) when the message is ready.
5. Press
SEND
(F1) or
ENTER
to initiate the call.
MICOM-3
SEND
PAGE
CHAN
CALL
1009
6. Proceed with the call as explained above (page 54 or 55).
Содержание 3f
Страница 1: ...Owner s Guide Part I Operation Installation 6886867J01A MICOM 3F 3T 3R HF SSB Transceivers ...
Страница 2: ......
Страница 4: ......
Страница 18: ...MICOM 3F 3T 3R HF SSB Owner s Guide Intentionally Left Blank xiv ...