Micom 3f, Руководство пользователя

Страница: 152 / 164

MICOM-3F/3T/3R HF-SSB Owner’s Guide
134
Preparing the micomTrooper 3 for Operation
Scope
This Section provides instructions for preparing the micomTrooper 3 for backpack operation. The
information presented in this Section includes:
•
Unpacking
• Familiarization with main equipment components
•
Preparation for backpack operation
Refer to page 141 for instructions on how to adapt the backpack transceiver to static operation with
dipole or other long-wire antennas.
Warning
High Voltage
During transmission, dangerously high RF voltages appear at the RF
connectors, the antenna cables, and on the antenna itself.
Do not touch the antenna and the RF connectors when the transceiver
operates. Make sure the antenna is not near high-voltage lines.
Warning
Lithium batteries contain dangerous chemicals. Handle and dispose of
used Lithium batteries according to the prescribed safety regulations. In
particular, observe the following precautions:
1. Do not short-circuit Lithium batteries.
2. Do not damage battery case and do not tamper with battery in any
way.
3. Do not dispose of used Lithium batteries by burning or incinerating.
Unpacking and Inspection
a. A preliminary inspection of the equipment containers should be made prior to unpacking.
Evidence of damage should be noted and reported immediately to the proper authorities.
Unpack the equipment as follows:
(1) Place each container on a clean flat surface, cut all straps, and open or remove the top.
(2) Take out each item carefully and place it securely on a clean surface.
(3) Remove the packing material while looking for small items.
(4) Fold and store the containers and packing materials for use.
b. Checking Unpacked Equipment.
(1) Inspect all items for damage. Immediately report any damage found.
(2) Check all items against the items listed in the accompanying packing slip. Report any
missing items or discrepancies.