4 | www.mhpgrills.com
ATTACH THE BASE TO THE COLUMN (OC BASE)
STEP 3A-OC
PARTS NEEDED FROM OC BOX
OC
CAST ALUMINUM BASE
GGAXL
AXLE
GGGC
AXLE CLIPS (2)
GGWL1
6" WHEELS (2)
OCOL
HUB CAPS (2)
ASPCL1
12' NATURAL
GAS HOSE
(Quick Disconnect
)
HARDWARE NEEDED
PART NEEDED (FROM OCOL BOX)
GGM4
KEP NUTS
(QTY. 6)
GGM6
1/4 X 20" X 3/4"
HEX BOLTS (QTY. 6)
GGM11
STAINLESS STEEL
WASHERS (QTY. 12)
TOOLS NEEDED
ADJUSTABLE
WRENCH
7/16" OPEN
END WRENCH
GGGSKA/GGGSKB
2-PIECE GASKET (1)
LEFT AND RIGHT
ATTACH THE GASKET
•
Before bolting the column to the base, the
2-piece gasket must be installed to create a
barrier between the two dissimilar metals.
•
Remove the backing strips from the gasket to
expose the adhesive and stick the gasket to
the bottom lip of the column. Make sure to
align the holes.
ATTACH THE COLUMN TO THE BASE
•
Attaching the column to the base will be easier
to handle by laying the column face down and
matching the holes on the column lip to the holes
on the base.
•
Slide a 1/4 x 20" x 3/4" Hex bolt and stainless
steel round washer down to the underside of the
base through the pre-drilled hole on the column
and secure using a Kep Nut.
•
Use a 7/16" wrench to hold the Kep Nut while
using a second adjustable wrench to tighten
the bolt. There are a total of six pre-drilled holes
which should be secured.
HEX BOLT
ROUND WASHER
ROUND WASHER
ATTACH WHEELS
•
For accessibility, lay the column on it's side.
•
Attach the wheels by slipping the axle
through the pre-drilled holes in the
base, slide the wheels onto the axle
and secure with the axle clips.
•
Finish by snapping the hub caps on
before standing the unit upright.
AXLE CLIP
AXLE
AXLE
AXLE CLIP
HUBCAP
HUBCAP
HEX BOLT
Included with natural
gas bases only
SCAN THE
QR CODE FOR
ASSEMBLY VIDEO
