Mhouse MhouseKit WG2S, Инструкция по установке и эксплуатации

Страница: 62 / 132

English
28 – English
ALLEGATO 2 APPENDIX 1
CE Declaration of Conformity
Declaration in accordance with the following Directives: 1999/5/EC (LVD), 2004/108/EC (EMC);
2006/42/CE (MD) annex II, part B
Note
- The contents of this declaration correspond to declarations in the last revision of the official document deposited at the
registered offices of Nice Spa available before this manual was printed. The text herein has been re-edited for editorial purposes.
A copy of the original declaration can be requested from Nice S.p.a. (TV) I.
Number: 366/WG2S Revision: 1 Language: EN
Manufacturer’s Name: NICE S.p.A.
Address: Via Pezza Alta 13, Z.I. Rustignè, 31046 Oderzo (TV) Italy
Person authorised to compile
the technical documentation:
NICE s.p.a.
Product type:
Electromechanical gearmotor with accessories
Model / Type: WG1SK, CL2S, GTX4, PH100, FL100
Accessories:
The undersigned, Luigi Paro, in the role of Managing Director, declares under his sole responsibility, that the above mentioned
products conform to the requirements of the following directives:
• CL2S and GTX4 models conform to the Directive 1999/5/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of the 9th
March 1999 regarding radio equipment and telecommunications terminal equipment and the mutual recognition of their con-
formity, according to the following harmonised standards:
- Health protection (art. 3(1)(a)): EN 62479:2010
- Electric safety (art. 3(1)(a)): EN 60950-1:2006+A11:2009+A12:2011
- Electromagnetic compatibility (art. 3(1)(b)): EN 301 489-1 V1.9.2:2011, EN 301 489-3 V1.4.1:2002
- Radio spectrum (art. 3(3)): EN 300 220-2 V2.4.1:2010
In accordance with the directive 1999/5/EC (appendix V), the product GTX4 is class 1 and marked:
0682
• Models WG1SK, CL2S, PH100 and FL100 conform to DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND
COUNCIL of 15th December 2004 regarding the approximation of member state legislation related to electromagnetic com -
patibility, repealing directive 89/336/EEC, according to the following harmonised standards:
EN 61000-6-2:2005, EN 61000-6-3:2007
In addition the products WG1SK and CL2S conform to the following directive according to the requirements for “partly com -
pleted machinery”:
2006/42/EC Directive OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machinery, repealing direc -
tive 95/16/EC
•
We hereby declare that the relevant technical documentation has been compiled in conformity with Annex VII B of directive 2006/42/EC and
that the following essential requirements have been satisfied:
1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
•
The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the “partly
completed machinery”, without prejudice to intellectual property rights of the manufacturer.
•
Should the “partly completed machinery” be put into service in a European country with an official language different from the one of this
declaration, the importer must attach the translation of this document to the declaration.
•
The “partly completed machinery” must not be put into service until the final machinery into which it is to be incorporated has been declared
in conformity with the provisions of directive 2006/42/EC.
In addition the products WG1SK and CL2S conform to the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008+A14:2010+A15:2011
EN 60335-2-103:2003+A1:2009
The products WG1SK and CL2S conform, within the constraints of applicable parts, to the following standards:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003
Oderzo, 29 August 2013
Ing. Luigi Paro (Managing Director)