Mhouse MhouseKit WG2S, Инструкция по установке и эксплуатации

Страница: 58 / 132

English
LED P3 [F]
Off *
On
1 slow flash
2 slow flashes
Status
Everything OK
Everything OK
There is no memorised opening angle
Opening angle learning phase is underway
Action
Cycle operation
Complete cycle operation
Perform the learning phase (see chapter 3.5.2 - Learning the leaf
opening and closing angles)
Opening angle learning phase is underway
LED P2 [E]
Off *
On
1 flash per second
2 flashes per second
Status
Everything OK
Everything OK
The learning phase has not been carried
out or there are errors in the memory data
Device learning procedure underway
Action
“Low” speed selected
“High” speed selected
Some faulty devices may be present; check and if necessary
repeat the device learning phase (see paragraph 10.3.3 “Learn
-
ing other devices”).
It shows that the search for connected devices is underway (it
lasts maximum a few seconds).
24 – English
LED P1 [D]
Off
*
On
Series of quick flashes,
from 1 to 4
5 quick flashes
1 slow flash
3 slow flashes
5 slow flashes
Status
Everything OK
Memorisation mode 1
Memorisation mode 2
Deletion OK
Wrong command
Memorisation OK
Deletion OK
Action
No memorisation underway
This is normal during memorisation mode 1 which lasts maxi
-
mum 10 s.
This is normal during memorisation mode 2 which lasts maxi -
mum 10 s.
Deletion of a transmitter successfully completed
Command received from a transmitter which is not memorised
Memorisation successfully completed
All radio transmitters successfully deleted
* or it could be in “Standby” mode