Instructions GD0 27
KS1 Key-Operated Selector Switch (optional)
Type
Key-operated double switch suitable for control of automatic gates and doors. Illuminated for night
operation.
Adopted technology
Activation protected by a lock, the insertion and clockwise turning of the key causes the closing of a
contact, the counter-clockwise turning of the key causes the closing of the second contact; spring-loaded
for return of key to the middle position.
Tamper-proof
The selector switch can be opened to access the connections only by inserting the key and turning it in
either direction
Security lock
Key with 450 different key numbers
Power supply/contacts
The device can only be connected to the “OPEN” input terminals 3-4 and 5-6 “STOP” of the MHOUSE
automation control units to which the command signals are sent and draws the power supply for night
lighting.
Operating ambient temperature
-20 ÷ 50°C
Use in acid, saline or potentially explosive
atmosphere
No
Mounting
Vertical, wall-mounted
Protection class
IP44
Dimensions / weight
95 x 65 h 36mm / 135g
FK1 Flashing light (optional)
Type
Flashing signalling light for automatic gates and doors. The device incorporates a receiving aerial for
remote control
Adopted technology
Visual signalling device with 12V 21W lamp, controlled by MHOUSE automation control units
Lamp
12V 21W BA15 socket (automotive type lamp)
Power supply/contacts
The device can only be connected to the “FLASH” output terminals 9-10 and “ARIEL” input 1-2 of the
MHOUSE automation control units.
Operating ambient temperature
-20 ÷ 50°C
Use in acid, saline or potentially explosive
atmosphere
No
Mounting
Horizontal surface-mounted or vertical wall-mounted
Protection class
IP44
Dimensions / weight
120 x 60 h 170mm / 285g
PH0 Photocells (optional)
Type
Presence detector for automated gates and doors (type D according to EN standard 12453) consisting of
a “TX” transmitter and an “RX” receiver
Adopted technology
Optical, by means of direct TX-RX interpolation with modulated infrared ray
Detection capacity
Opaque objects located on the optical axis between TX and RX, larger than 50mm and moving slower than 1.6m/s
TX transmission angle
approx. 20°
RX reception angle
approx. 20°
Useful capacity
Up to 10m for maximum TX-RX misalignment of ± 5° (the device can signal an obstacle even in the case
of adverse weather conditions)
Power supply/output
without jumper 24Vac/Vcc limits 18-35Vcc, 15-28Vac
with jumper 12Vac/Vcc limits 10-18Vcc, 9-15Vac
Maximum absorption
25mA RX, 30mA TX = 55mA per torque
Maximum cable length
Up to 20 m (observe the directions regarding the minimum gauge and type of cable)
Operating ambient temperature
-20 ÷ 50°C
Use in acid, saline or potentially explosive
atmosphere
No
Mounting
Vertical, wall-mounted
Protection class
IP44
Dimensions / weight (TX and RX)
95 x 65 h 25mm / 65g
