MHG Heating ThermSelect, Инструкция по сборке, пусконаладке и техническому обслуживанию

Страница: 77 / 100

ThermSelect®
10. Warranty
77/100
Warranty
The ThermSelect
®
heat pump by MHG renders its perfect function
only when installed and started professionally.
Warranty conditions of MHG can be taken from the warranty certifi-
cate.
Spare parts
NOTE!
Use only original MHG spare parts in case of re-
placements: Some components have been designed
and manufactured especially for MHG devices. Al-
ways specify the serial number when ordering spare
parts.
PRECAUTION!
Device damage from the use of incorrect compo-
nents!
Using parts not manufactured/supplied by MHG can
cause material decomposition.
Therefore:
-
Only parts specified by MHG must be installed in
the cooling unit.
Warranty claim for
wearing parts
(See recommendation EHI European Heating Industry, information
bulletin 14)
The spare parts list also contains "spare parts" that must be re-
placed when the device is used as intended within the warranty pe-
riod.
The warranty periods have been extended by law makers, however,
this does not preclude possible wear and tear from operation. It is
known that a device may operate up to 8,760 hours a year when
used as intended if this is a permanent operation system. According
to customary commercial treatment, the costs incurred in these con-
ditions are not covered by the warranty obligation or commitment of
the manufacturer.
The components listed in the spare parts list have been divided into
the following categories:
1. Spare parts
Spare parts are used for the repair of products
a) Parts are replaced that have not reached the expected ser-
vice life although the device was operated as intended.
b) Furthermore, parts that are replaced due to improper opera-
tion or unintended use (e.g. wrong burner settings, water flow
to low or too high, boiler scale through unsuitable filling water,
use of incorrect refrigerant, etc.).