MGP DMC 2000 S, Руководство пользователя

Страница: 13 / 65

DMC 2000S Dosimeter
15-00007 Page 13 of 65
4. Start-up
To start up a DMC 2000S dosimeter, the following procedures must be performed:
!
it must be initialized (i.e. switched from storage mode to pause mode)
!
it must be configured (i.e. programmed for alarm threshold values, dose rate display
authorization, alarm rate authorization, alarm duration, etc.)
!
if in satellite mode, it must be assigned to an individual
!
it must be activated (i.e. turned on for normal operation)
4.1 Satellite mode
In a centralized dosimetry system, a “server” computer performs the start-up procedure via an
LDM 2000 reader.
4.2 Autonomous mode
For use in the autonomous mode, the initialization and initial configuration are generally
performed at the factory.
Use of the selector button activates the dosimeter (refer to the section on
Setting operating
parameters In the autonomous mode, page 41).
In addition, modification of some parameters can also be performed when in the
pause mode
by using the selector button (refer to the section on Setting operating parameters In the
autonomous mode, page 41).