DMC 2000S Dosimeter
15-00007 Page 20 of 65
5.3.2. Operation of the selector button
Using the selector button in the satellite mode allows additional information to be
viewed on the
DMC 2000S
dosimeter’s display. This data and the corresponding
displays are described below. Depending on the dosimeter’s configuration, some data
can be intentionally concealed.
The different functions of the selector button are listed below:
!
pressing the button:
#
displays the next data set
!
pressing and holding:
#
maintains the current data on the display
!
after 5 seconds without pressing:
#
reverts to normal display in the
pause
mode
The following data is displayed in succession (by pressing the selector button):
5.3.2.1.
Dosimeter number display
This value corresponds to the identification number specific to the
dosimeter.
5.3.2.2.
Cumulative dose display
This data corresponds to the cumulative dose equivalent for the main
measurement during the last time period in the
measurement
mode
(i.e. since the last dose reset to zero, normally performed upon area
entry, depending on the centralized dosimetry system’s
configuration).
The display is shown in scientific notation.
In the example above, the value of the rate corresponds to 5.70
mRem (5.70 * 10
0
mRem).
