DMC 2000S Dosimeter
15-00007 Page 45 of 65
8.4 Modifying parameters
In the
autonomous
mode, the user can modify the various operating parameters of the
DMC 2000S dosimeter by using the selector button.
Reminder
: in the satellite
mode
, all parameter modifications require the Use of an
LDM 2000 reader and centralized dosimeter system software.
8.4.1.
Accessing the modification mode
This is accomplished by following the procedure described below. Begin in the
pause
mode.
Press and release the selector button once and the display changes to:
Press and release the selector button a second time and the DMC 2000S dosimeter is now
in the
parameter modification
mode.
First, the message below will be displayed for a few seconds.
then the following message is displayed:
When this message is displayed,
immediately
press the selector button to access the
parameters to be modified.
