MGM BAH 132 Series, Руководство по эксплуатации и обслуживанию

Страница: 40 / 63

Page 40 of 63
Doc. Ref.: A79H0319
- Slide the encoder through the motor shaft.
Motor shaft
Encoder
To put the new encoder proceed backwards.
Recovery/disposal
Disposal of the motor must be carried out in compliance with current applicable regulations in the country of installation.
The crossed-out waste bin symbol, contained on the infomation plate, indicates that, at the end of its useful life, the
product must not be disposed of as urban waste but must be collected seperately from other waste and sent for
recovery or possible disposal according to specific methods for avoiding possible negative effects on the environment
and to health, and for favouring its re-use and/or recycling of the materials of which it is made up.
The greater part of the motor components is made up of materials (steel, copper, aluminium, etc,) which could be re-
used/recycled, thus contributing towards safeguarding the environment.
For further information on modes of disposal/recovery or specific information on the various materials making up the motor, visit
our website (
www.mgmrestop.com ) or contact MGM Italia.
Spare parts
To identify the proper spare part, please provide the below item number, motor type and serial number.
1 - Rotor Shaft 28 - Terminal board box screws (6 units)
2 - Key 29 - Terminal board box
3 - Front bearing 30 - Terminal board
4 - Endshield Drive End 32 - Cable gland
7 - Frame 34 - Terminal box/brake coil connection
8 - Circlip 36 - Flange cover (B5)
9 - Rear cover 38 - Elastic washer
11 - Fan 52 - Encoder fixing plate (BAHE, BAHXE)
12 – Rear cover seal 53 - Encoder (BAHE, BAHXE)
15 - Rear bearing 54 - Encoder protective cover (BAHE, BAHXE)
17 - Brake friction surface 118 - Unlocking type hand brake release screw (2 units)
18 - Spring (6 units) 119 - Brake Adjuster Plug (6 units)
19 - Brake adjuster (6 units) 125 - Brake Cover Locknut
20 - Brake torque adjuster locknut (6 units) 126 - Hinge for unlocking type brake release circlip (optional)
21 - Air gap adjusting nut (6 units) 127 - Hinge for unlocking type brake release (optional)
22 - Brake Coil Locknut (6 units) 128 - Unlocking type hand brake release lever (optional)
23 - Brake disc 129 - Unlocking type hand brake release locknut (optional)
24 - Brake moving element 130 - Brake release plug
25 - Brake coil 131 - Locking type brake release screw (2 units)
26 – Cast Iron Brake Cover 132 - Brake hand release locking screws