MGM BAH 132 Series, Руководство по эксплуатации и обслуживанию

Страница: 23 / 63

Page 23 of 63
Doc. Ref.: A79H0319

On motors with special execution or destined to North America, additional information might be present (e.g. Code letter,
CC number, Service Factor, etc.). Hence there might be a variation in the location of some information on the nameplate.
1
Duty type
2 Protection degree
3 Insulation Class, the letters TR following the insulation class means tropicalized treatment
4 Weight (Kg)
5 Motor type Designation
6 Serial Number
7 Maximum Static Brake Torque obtainable with proper regulation of the springs (Nm)
8 Brake current (A).
9 Brake Voltage Supply (V). On brake motors with AC brake, the symbol “Vb = Vm” indicates that the motor and brake have the
same voltage supply. For motors with DC brake, the indication 1~230V or 1~400V states the value of single phase voltage to be
supplied at the rectifier entry.
10 Rated Power (kW) at 50 Hz
11 Power Factor at 50 Hz
12 Motor Speed (RPM) at 50 Hz
13 Motor Voltage Supply at 50 Hz, Delta connected
14 Motor Amps at 50 Hz, Delta connected
15 Motor Voltage Supply at 50 Hz, Star connected
16 Motor Amps at 50 Hz, Star connected
17 Rated Power (kW) at 60 Hz
18 Power Factor at 60 Hz
19 Motor Speed (RPM) at 60 Hz
20 Motor Voltage Supply at 60 Hz, Delta connected
21 Motor Amps at 60 Hz, Delta connected
22 Motor Voltage Supply at 60 Hz, Star connected
23 Motor Amps at 60 Hz, Star connected
24 Motor voltage supply at 50 Hz
25 Motor Amps at 50 Hz
26 Motor voltage supply at 60 Hz
27 Motor Amps at 60 Hz
28 Mounting
29 Motor special execution identification. For motors with additional cooling fans, the fan voltage supply is shown in this
location, preceded by the letters “VENT”. The letters “TP” indicate the presence of bimetallic thermal protectors, “TM”
indicate thermistors, and “SCALD” indicates anti-condensation heaters, all followed by the voltage supply.
30 Efficiency and efficiency class at 50Hz
31 Efficiency and efficiency class at 60Hz
32 Certification marks (cCSAus, etc.)
33 DM, if present, means double terminal board for separate supply of the brake from the motor.
34 Number of phases of the motor (3 = three phase)
Efficiency
The European regulation 640/09/CE modified from 04/14/CE which refers to a motor minimum energetic efficiency level, applies
to induction motors with squirrel cage rotor, single speed, three phase, with a frequency of 50 Hz or 50-60 Hz, 2,4,6 poles, with
maximum nominal supply voltage of 1000 V, with nominal power in the range between 0,75 kW and 375 kW under continuous
duty.
This European regulation does not apply to brake motors. MGM brake motors belonging to the BAH series are also available in
efficiency class IE3 (BAHX series) even if not required by the European regulation 640/2009 (modified from 4/2014). For further
information, please contact MGM.
Different regulations regarding motor minimum energetic efficiency levels apply in different countries in the world. The user must
verify which regulations are in force. For further information, please contact MGM.