3. Operations
Setting the FTP Password
The FTP Password command sets the password as required by the FTP Host.
To set the FTP password:
At the Switched PDU: prompt, type
set ftp password
, followed by the FTP password and press
Enter
.
Example
The following command sets the FTP password to OpenSesame:
Switched PDU: set ftp password OpenSesame<Enter>
Setting the filename to be uploaded
The FTP Filename command sets the filename of the firmware file to be uploaded.
To set the FTP filename:
At the Switched PDU: prompt, type
set ftp filename
, followed by the firmware filename and press
Enter
.
Example
The following command sets the FTP filename to snb_s53a.bin:
Switched PDU: set ftp filename snb_s53a.bin<Enter>
Setting the filepath for the file to be uploaded
The FTP Filepath command sets the filepath for the firmware file to be uploaded.
To set the FTP filepath:
At the Switched PDU: prompt, type
set ftp filepath
, followed by the filepath and press
Enter
.
Example
The following command sets the FTP filepath to ftp://Switched PDU:
Switched PDU: set ftp filepath ftp://Switched PDU<Enter>
Displaying FTP configuration information
The Show FTP command displays all FTP configuration information.
•
FTP Host IP address
•
FTP Host username and password
•
Firmware filepath and filename
To display FTP configuration information:
At the Switched PDU: prompt, type
show ftp
and press
Enter
.
Example
The following command displays the FTP configuration information:
Switched PDU: show ftp<Enter>
FTP Configuration
Host IP Address: 12.34.56.99
Username: guest
Password: OpenSesame
Directory: ftp://Switched PDU
Filename: snb_s53a.bin
Page 42 - 301-0399-4 Rev A.
