3. Operations
Administrative Command Summary (continued)
Set FTP Filename
Specifies the file to be uploaded via FTP
Set FTP Filepath
Specifies the filepath for the file to be uploaded
Set FTP Host
Sets the FTP Host IP address
Set FTP Password
Sets the password for the FTP Host
Set FTP Username
Sets the username for the FTP Host
Set Gateway
Sets the Gateway
Set Infeed Name
Specifies a descriptive field for the infeed
Set Ipaddress
Sets the IP address
Set Location
Specifies a descriptive field for the HTML control screen and login banner
Set Outlet Name
Specifies a descriptive field for a device attached to an outlet
Set Outlet Wakeup
Sets the wakeup state for an outlet
Set Subnet Mask
Sets the Subnet Mask
Set Telnet Port
Sets the Telnet server port number
Set Telnet
Enables or disables Telnet access
Set Tower Name
Specifies a descriptive field for the Switched PDU
Set User Access
Sets the access level for a user
Set User Envmon
Grants or removes privileges to view input and environmental monitoring status
Set User Password
Changes the password for a user
Set Port Name
Specifies a descriptive field for a serial port
Set Port Dsrchk
Sets the DSR active signal checking for a serial port
Set Port Speed
Set the connection speed for all serial ports
Show FTP
Displays FTP configuration information
Show Infeeds
Displays infeed configuration information
Show Network
Display network configuration information
Show Outlets
Displays configuration information for all outlets
Show Ports
Displays serial port configuration information
Show System
Displays system configuration information
Show Towers
Displays tower configuration information
Version
Displays the Switched PDU firmware version
To display the names of commands that you may execute:
At the command prompt, press
Enter
. A list of valid commands for the current user appears.
301-0399-4 Rev A. - Page 23
