3. Operations
Creating a descriptive tower name
The Set Tower Name command assigns a descriptive name to a tower. This descriptive name is displayed
when the Show Traps command is issued. See SNMP Traps on page 49 for more information on the Show
Traps command.
To create a tower name:
At the Switched PDU: prompt, type
set tower name
, followed by the absolute tower name, then the
descriptive name of up to 24 alphanumeric and other typeable characters (ASCII 33 to 126 decimal - spaces
are not allowed). Press
Enter
.
Examples
The following command adds the descriptive name Florida_HQ_1 to tower .a:
Switched PDU: set tower name .a Florida_HQ_1<Enter>
Displaying tower information
The Show Towers command displays information about the Switched PDU. This information includes the
absolute and descriptive Switched PDU names.
To display tower information:
At the Switched PDU: prompt, type
show towers
and press
Enter
.
Example
Switched PDU: show towers<Enter>
Tower Tower
ID Name
.A Florida_HQ_1
Creating a descriptive infeed name
The Set Infeed Name command assigns a descriptive name to an infeed. This descriptive name is displayed
when the Show Traps command is issued.
To create a infeed name:
At the Switched PDU: prompt, type
set infeed name
, followed by the absolute infeed name, then the
descriptive name of up to 24 alphanumeric and other typeable characters (ASCII 33 to 126 decimal - spaces
are not allowed). Press
Enter
.
Example
The following command adds the descriptive name HQ_1_Infeed_A to the infeed on the Switched PDU:
Switched PDU: set infeed name .aa HQ_1_Infeed_A<Enter>
Displaying Infeed information
The Show Infeeds command displays information about all infeeds. This information includes the absolute and
descriptive infeed names.
To display tower information:
At the Switched PDU: prompt, type
show infeeds
and press
Enter
.
Example
Switched PDU: show infeeds<Enter>
Input Input
Feed ID Feed Name
.AA HQ_1_Infeed_A
.AB HQ_1_Infeed_B
.BA HQ_2_Infeed_A
.BB HQ_2_Infeed_B
Page 38 - 301-0399-4 Rev A.
