MG Energy Systems B.V. | Foeke Sjoerdswei 3 | 8914 BH Leeuwarden | The Netherlands
+31 (0)58 750 89 47 | [email protected] | www.mgenergysystems.eu
Innovation
in energy storage
Qualifications and training
The personnel responsible for the assembly, operation, inspection, and maintenance of the battery system
must be appropriately qualified. The user company must do the following tasks:
Define the responsibilities and competency of all personnel working on the battery system.
Provide instruction and training.
Ensure that the contents of the operating and safety instructions have been fully understood by the
personnel.
Check the local safety rules and guidelines they have higher preference over the manufacturers
specification in case of regulatory conflicts.
Working on higher voltages requires specific training and certification.
Instructions and training can be carried out by MG Energy Systems B.V. by order of the user company.
Non-compliance risks
Failure to comply with all safety precautions can result in the following conditions:
Death or serious injury due to electrical, mechanical, and chemical influences.
Environmental damage due to the leakage of dangerous materials.
Product damage.
Property damage.
Loss of all claims for damages.
Unacceptable modes of operation
The operational reliability of this product is only guaranteed when it is used as intended. The operating limits
on the identification tag and in the data sheet may not be exceeded under any circumstances. If the
identification tag is missing or worn, contact MG Energy Systems B.V. for specific instructions.
WARNING:
The battery modules may only be used in combination with a master BMS.
(MG Master LV or MG Master HV)
