MG Energy Systems B.V. | Foeke Sjoerdswei 3 | 8914 BH Leeuwarden | The Netherlands
+31 (0)58 750 89 47 | [email protected] | www.mgenergysystems.eu
Innovation
in energy storage
Parallel configuration
The battery module can set in parallel to create a larger system capacity. There is no limit of the number of
batteries to connect in parallel, whatever is physically possible.
There are a number of possibilities with specific requirements to do this.
CAUTION:
Make sure the voltage of each battery module is equal when connecting them in
parallel. Excessive high uncontrolled currents can flow between battery modules
when the voltage is not equal. This can damage the batteries and might lead to
other damage or injury.
NOTICE:
When connecting battery modules in parallel to a junction box:
The power cables of each battery module need to have matching lengths
as good as possible.
Battery modules can be connected separately in parallel to a Master LV. It has four power connection
positions where four batteries could be connected. Refer to the Master LV manual for more information.
Figure 10 shows the most basic parallel connection that is possible. The power connection of each battery is
directly connected to a Master LV.
Figure 10 - Four battery module connected in parallel on a single Master LV
