background image

GB

FS 345 Door Controls / Rev.A 0.0 – 37 

14.  EC Declaration of Incorporation

We hereby declare that the product described below:

FS 345 Door Control

is in conformity with all essential requirements of the Machin-

ery Directive 2006/42/EC.

In addition, the partly completed machinery is in conformity 
with all regulations of the EU Construction Products Regula

-

tion No. 305/2011, the Electromagnetic Compatibility Directive 
2004/108/EC and the Low Voltage Directive 2006/95/EC.

The following standards were applied:

EN 60204-1

Safety of machinery, electrical equipment of machines; Part 1:  

General requirements

EN ISO 12100
Safety of machinery – general principles for design - risk as

-

sessment and risk reduction

DIN EN 12453

Safety in use of power operated doors - Requirements

DIN EN 61000-6-2 
Electromagnetic compatibility (EMC) - Part 6-2: Generic 
standards - Immunity for industrial environments

DIN EN 61000-6-3
Electromagnetic compatibility (EMC) - Part 6-3:  

Generic standards - Emission - standard for residential, com

-

mercial and light-industrial environments

DIN EN 60335-1

Household and similar electrical appliances - Safety - Part 1:  

General requirements 

DIN EN 60335-2-103

Household and similar electrical appliances - Safety - Part 
2-103: Particular requirements for drives for gates, doors and 

windows 

The relevant technical documentation is compiled in ac-

cordance with Annex VII (B) of the EC Machinery Directive 
2006/42/EC. We undertake to transmit, in response to a 
reasoned request by the market surveillance authorities, this 

information in electronic form within a reasonable term. 

Person authorised to compile the relevant technical documen-
tation: 

MFZ Antriebe GmbH & Co. KG, Neue Mühle 4, 

 

D-48739 Legden

 

The machinery is incomplete and must not be put into service 
until the machinery into which it is to be incorporated has 
been declared in conformity with the provisions of the Ma-

chinery Directive 2006/42/EC.

Place / Date:

Legden, 01/03/2014

Manufacturer’s signature

Dirk Wesseling

Position of signatory

Management

Содержание FS 345









































Отзывы: