MFC SPEED CREED, Руководство по эксплуатации и запасным частям

Страница: 20 / 68

OPERATION
18 REV.03_9/2021
Lifting Eyes
Machine Operation
Machine Basics
The Speed Screed™ Roller (SSR) is a variable length triple tube roller system that allows
users to easily swap rollers and extension frames between jobs that require different pour
widths. With rollers and extensions available from 10’ to 30’ in single foot increments, almost
any job can be easily handled with this machine.
This machine comes with standard safety features such as the kickstand (steering leg) and
drive lever hydro-back, which returns the drive lever to neutral when the operator steps away
from the machine. It also available with an optional idler end weight pack to offset the engine
end weight differential, or a spray system to keep your roller tubes clean during operation.
Metal Forms Corporation™ manufactures these machines with state-of-the-art equipment and
processes, and only sources the highest quality materials and components to ensure a long
life out of your investment.
Our one-of-a-kind design utilizes a variable volume, closed loop dual piston pump and a
remote-mounted muffler to allow for a fully enclosed power side end frame. This design
simplifies the system, reduces the number of components, and allows for easier maintenance
and clean-up every time you use the machine.
Loading/Unloading Your Machine
When loading and unloading your machines from a flat-bed or trailer, always use either the (4)
provided lifting-eyes with shackles and chains rated above the maximum weight of your
machine or the provided adjustable fork pocket assemblies.
The lifting eyes are attached to the extension frame and can be moved to adjust the picking
points for different length machines. The fork pockets can be adjusted by loosening the square
U-bolts. Always place the picking support bars or fork pockets at an equal distance from the
center of gravity of the machine.
Fork
Pockets