MFC SPEED CREED, Руководство по эксплуатации и запасным частям

Страница: 16 / 68

SAFETY
14 REV.03_9/2021
General Safety Guidelines
•
Operator concentration is always an important factor when using mechanical equipment
and anything that distracts the operator during operation is a clear and present danger.
•
Familiarity and proper training are required for the safe operation of all Metal Forms
Corporation™ equipment. Equipment operated improperly or by untrained personnel
can be dangerous. All operators
MUST read both the General Safety Guidelines Sheet
and the Speed Screed manual prior to operation.
•
NEVER allow anyone to operate this equipment without proper training. People
operating this equipment must be familiar with all the risks and hazards associated with
it.
•
DO NOT operate any equipment while under the influences of drugs, alcohol, or
medications
•
Check machine EACH DAY before use to ensure it is proper running condition.
•
If any parts are worn or damaged, fix or replace IMMEDIATELY .
•
ALWAYS use OEM replacement parts.
•
When equipment is not in use, remove the key and be sure to store it in a clean and dry
environment, out of reach of unauthorized personnel and children.
•
ALWAYS keep doors, covers, and heat shields attached/closed when the engine is
running.
•
DO NOT place hands or fingers inside the engine compartment when
engine is running.
•
Keep fingers, hands, hair, and clothing away from all moving parts to
prevent injury.
•
DO NOT remove the engine oil drain plug while the engine is hot. Hot oil can rapidly
flow out of the oil tank and severely scald or burn any persons in the general area of the
machine.
NOTICE
WARNING