Page 7
Removing Packing Restraints
The Scribe ships with a picker arm restraint to reduce the possibility of
damage in transit. This restraint must be removed before operation or
power-on. Remove the foam block above the transfer arm. Save the foam
block, as you will need to return it to its place when transporting the unit in
the future.
Input and Output Spindles
The input areas and output spindle serve as the containers to store the blank
and recorded discs. Spindle capacity ranges from 250 discs to 600 discs
depending on model and setup.
Making the connection
The Scribe requires a Monitor, Keyboard, and mouse to use it properly.
While these items are not included, they are readily available and standard
PC components.
•
Make sure the Scribe power switch is set to the off position.
•
Please connect you monitor, keyboard, and mouse now, then connect
the AC power cord in to the receptacle at the rear of the unit, and the
other end into the wall or UPS power outlet.
C A U T I O N
Always use properly grounded receptacles, or severe damage
to your system may result. The use of a surge protector or
Uninterruptible Power Supply (UPS) is highly recommended.
