CD-3706/P
Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 43
•
Press the “Start/Yes” key, and you will be returned to the main
operating screen:
Note:
If the master failed to copy to the hard drive properly, the
master disc will be placed in the reject area in front of the
drives. These discs should not be used.
Enabling Verify After
•
From the main operating screen depicted below:
•
Press the “2” key and the screen will now display in sequence:
•
Press the “0” key, and the screen will now read:
•
Press the “Start/Yes” key to enable, or the “Stop/No” key to disable the
Verify After
option. If you press the “Start/Yes” key the screen will
read:
•
You will then be returned to the main operating screen.
