CD-3706/P
Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 22
•
Make sure you power on the unit using the primary power switch
located on the back of the Scribe EC Standalone. You must also power
on the drive bay. That switch is located at the front of the drive bay
itself.
•
Once the proper voltage setting has been confirmed, it is time to turn on
the unit. Wait a minute or two while the system starts up. The screen
will now read:
After the startup routine is complete, a series of self-diagnostics will be
performed. The screen will now read in sequence:
Once complete, the unit will display the main operating screen:
