CD-3706/P
Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 27
•
Press the “6” key on the keypad. Something similar to the following
will be displayed in sequence:
This display is the device information for each of the recorders
installed in the Scribe EC Standalone. This includes their host
number, model name, and firmware version.
•
Press the “7” key on the keypad. The screen will now read:
•
Press the “Start/Yes” key to clear the hard drive.
If the “Stop/No” key is pressed you will be prompted to set the
“System Time.”
•
Press the “Start/Yes” key to set the system time.
If the “Stop/No” key is pressed you will be prompted to “Read
ATIP.”
When selected, the
ATIP
function allows you to determine the
manufacturer of the CD-R placed in drive 1 of the Scribe EC
Standalone. (Not available on DVD)
•
If you pressed the “Stop/No” key at you will be prompted to “Set the
Drive Order”:
•
Press the “Stop/No” key if you do not want to reset the drive order.
Press the “Start/Yes” key and you will then see the following screen:
