CD-3706/P
Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 25
•
0- The factory setting for this function is disabled. When enabled,
the
Verify After
feature automatically compares discs to the master
disc or hard disk image after copying is completed. Due to the nature
of the various compact disc formats, only CD-ROM Mode 1, CD-
ROM Mode 2, CD-ROM XA Mode 2 Form 1, and audio (CD-DA)
discs can be compared.
•
1- The factory setting for this function is disabled. When enabled,
the
Multiple Images
feature allows up to six images to be stored on
the hard disk drive at one time. This setting will remain in effect
until disabled, even after restarting the Scribe EC Standalone.
•
2- The factory setting for this function is “enabled”. When
“disabled”, the
Click Detection
feature allows masters with small
random errors to be read to the hard drive. Caution should be taken
when disabled, as masters that would normally be rejected will be
allowed to be read-in. Undesirable results may occur.
•
5- Pressing the “5” key will give you the option to choose a printer
or disable the printer option. See the
Utilizing the Printer
Option
section of this manual for more information.
•
Not used.
•
Press the “4” key on the keypad. The screen will now read:
