background image

36

Seat inclination:
Model 3.600: ............................................................................................................ 4°
Model 3.604: ............................................................................................................ 4°

Leg support angle: ............................................................................................... 110°

Foot support to seat, without seat cushion (lower shank length):
with leg support code 805 (min. / max.): ..................................................38 / 49 cm

Wheels

Steering wheel:
ø 142 mm: .........................................................................................soft solid rubber
ø 200 x 25 mm: ........................................................................................ solid rubber
ø 200 x 50 mm, polyurethane foam: ...................................................puncture safe
ø 200 x 50 mm, pneumatic tyres: ................................................................... 2.5 bar

Driving wheel:
ø 559 mm (22 x 1 3/8“) pneumatic tyres: ....................................................... 4.0 bar
ø 559 mm (22 x 1 3/8“) polyurethane foam: ......................................puncture safe

ø 610 mm (24 x 1 3/8“) pneumatic tyres: ....................................................... 4.0 bar
ø 610 mm (24 x 1 3/8“) polyurethane foam: ......................................puncture safe

Handrim diameter (min. / max.): .........................................................43.5 / 48.5 cm

Axle:
Horizontal position: ........................................................................................... 0 mm

Transport dimensions

Folding length (with leg supports):
Model 3.600: ................................................................................................ 1080 mm
Model 3.604: ................................................................................................ 1160 mm

Folding length (without leg supports, drive wheels):
(Support castors are removed or swivelled underneath the seat)
Model 3.600 / 3.604: ...................................................................................... 810 mm

Folding width:
Model 3.600: .................................................................................................. 310 mm
Model 3.604: .................................................................................................. 330 mm

Folding height:
Model 3.600: ..........................................................................................min. 920 mm
Model 3.604: ........................................................................................min. 1040 mm

Содержание 3.600













































Отзывы: