3
2
1
23
BACK SUPPORT
Apart from the standard back sup-
port [1] depending on model, the
wheelchair can be equipped with an
angle adjustable back support:
Back support with angle
adjustment
30 ° Angle adjustment
The back support can be reclined in
several positions [1].
– To adjust the angle of the back sup-
port, loosen the clamping screws
on both sides with the handwheel
(2).
– Afterwards lift the saw tooth tin
for angle adjustment on both sides
(3) and adjust the back support to
the desired angle.
– After the adjustment release the
saw tooth tin for angle adjustment
on both sides (3) and let the back
support engage in the same posi-
tion.
☞
Note:
During the back support adjust-
ment make sure that both back
tubes are adjusted parallel.
!
Attention:
After the adjustment make sure
that the back support has locked
into place. – Danger of injury!
– Finally retighten the handwheel
on both sides (2).
