2
3
4
1
16
Removing the calf belt
For removal, open the velcro fasten-
ers at the back of the calf belt (1) fi rst,
then pull the calf belt off of the upper
leg supports (2).
Attaching the calf belt
For fastening, fi rst pull the two ends
of the calf belt through the upper
leg supports (2) and fastened on the
back of the calf belt with the velcro
fastener [3].
Length adjustment of the calf belt
For length adjustment the calf belt
is adjusted in corresponding length
with help of the velcro fastener.
Leg support lower part
The footplates are to be folded up for
entry into, exiting the wheelchair or
scuttling (moving the wheelchair with
help of the feet) [4].
☞
Check the locking points!
– Remove both feet from the foot-
plates.
– Remove lower calf belt, if present.
☞
Hereto observe chapter <
Calf
belt
>.
☞
Note:
Before starting to drive the foot-
plates are to be folded down again
[4] and the calf belt attached.
Footplates
The footplates can be folded outward
and up resp. inward and down [4].
