Meyra 3.350, Руководство по эксплуатации

Страница: 34 / 56

34
☞
Note:
The headrest on the wheelchair serves as
a support for the posture of the head, not
as a transport security. Therefore a handi-
capped transport vehicle-firm head sup-
port is necessary!
!
Attention:
Angle adjustable back supports are to be
set vertically.
• Tipped seats are to be set horizontal.
• Is a securing system in compliance to DIN
75078 Part 2 required for the wheelchair,
contact and specialist dealer.
PRODUCT LIABILITY INSTRUCTIONS
☞
Transport in the wheelchair with a handi-
capped transport automobile is done at
own risk!
☞
We do not accept liability for damages or
other possessions that occurred through
the transport in a handicapped transport
automobile.
SAFETY INFORMATION
☞
When transporting a person, make sure
that there are no objects jammed under-
neath the straps! – Thus you avoid painful
pressure points
☞
As far as possible use a vehicle-installed
seat during transportation.
☞
Only transport the wheelchair in driving
direction.
☞
The driver, resp. the attendant is responsi-
ble for the professional securing of the
wheelchair in the handicapped transport
automobile.
☞
For professional transport in a handi-
capped transport automobile the wheel-
chair and person have to be placed on the
therefore determined space and secured
with the corresponding securing system.
☞
Loose object are to be stored securely.
SPECIAL SAFETY INSTRUCTIONS
FOR SHELL SEATS
!
Attention:
The power knot on children’s seats and gen-
erally for shell provisions (incl. RECARO-sys-
tem) serves solely for securing the wheel-
chair inside the handicapped transport vehi-
cle!
• Only use seats that have been cleared by
the manufacturer for the transport in a hand-
icapped vehicle.
• It must be guaranteed that hip- and shoulder
strap lie tight around the user. Otherwise the
person might slide out underneath the belt in
case of an emergency.
• Securing of the person must be achieved
with a strap that is integrated into the seat or
shell.