Meyra 3.350, Руководство по эксплуатации

Страница: 40 / 56

40
FLAT TYRE
If a flat tyre occurs to the air filled tyres due to
puncture by sharp objects such as nails,
screws, glass splinters, etc. the damage
should be eliminated by repairing (mending
the inner tube) or replacing the inner tube.
!
Attention:
Sitting in the wheelchair during a wheel
change is not permitted. The wheelchair
must stand on a level and firm surface. Be-
fore starting the disassembly work, support
the frame to prevent the wheelchair from tip-
ping over and secure it to prevent an un-
wanted movement or tipping over.
Changing the tyres
☞
Note:
☞
Always change tyres in pairs. – Differently
worn tyres can impair the straight-on travel
of the wheelchair.
☞
The air pressure for the tyres is shown on
both sides of the tyre and in the <
Techni-
cal data > section.
Tyre change of the drive wheels
!
Attention:
Before tyre repair, open the pneumatic
valve and vent any remaining compressed
air in the inner tube.
• Ensure that the tyre cover is always removed
and reinstalled with the appropriate tyre le-
vers (bicycle accessories).
• Never use screw drivers or other pointed /
sharp edged objects as levers!
Tyre change of the steering wheels
– Before replacement or repair the steering
wheel axle (A, fig. 37) is to be disassembled.
☞
Take note of the arrangement of all sleeves
and washers used.
☞
The valve (1) faces outward.
37
A