Meyra 3.350, Руководство по эксплуатации

Страница: 17 / 56

17
13.7
B
Remove the leg supports
– Press the locking bracket forward against
the frame tube (fig. 13.5). Afterwards re-
move the leg support toward the top.
Attaching the leg supports
– Hang the leg support from the top onto the
upper and lower leg support pin (A, fig.
13.7) and swivel it inwards again.
☞
Note:
☞
The locking of the leg support must audibly
click when swivelling inwards after leg
support attachment.
☞
Check the locking device of the respective
leg support after inserting it and swivelling
it back inward.
Altering the foot board height
– Operate parking brakes. – This prevents ac-
cidental rolling of the wheelchair (see sec-
tion “Parking brakes”).
– Demount screws (A, fig. 13.7) on both
sides.
– Adjust the foot board to the desired height.
– Remount the screws (A, fig. 13.7) again on
both sides.
Depth adjustable footplates
The angle between the upper and lower shank
can be adjusted to the desired position.
– Operate parking brakes. – This prevents ac-
cidental rolling of the wheelchair (see sec-
tion “Parking brakes”).
– Disassemble screws (C, fig. 13.8) on each
footplate.
– Reposition the footplates into the desired
position.
– Reassemble the screws (C, fig. 13.8) of
each footplate.
A
13.8
C
C