Meyra 2.322, Руководство по техническому обслуживанию и ремонту

Страница: 41 / 52

41
Replace power-, steering-/lighting- resp.
adjustment module
1. Before replacing a module all plugged connections are
to be disconnected.
☞
In doing so it is recommended to place each plug
that is pulled directly into the new module. This
prevents establishing incorrect plugged connec-
tions.
2. Afterwards remove the screws of the defective module.
☞
For this it is recommendable to remove the two
screws (1) on the power- (2), resp. steering-/lighting
module (4) and to lift the module with the assem-
bly plate out of the battery well and afterwards to
remove the attachment screws of the module.
3. Remount the new module analogue in reverse order.
!
Attention:
It is to be observed that the cables are not damaged or
bent when being placed.
☞
Otherwise danger of fire through short circuits!
☞
Previously removed cable ties are to be replaced.
☞
Then carry out a function test.
☞
For this observe chapter Functional checks on
page 46.
Power module
The power module (2) is mounted to the assembly plate be-
tween the batteries.
Steering-/Lighting module
The combined steering-/lighting module is mounted be-
side the power module onto the assembly plate between
the batteries.
Adjustment module
The adjustment module (3), depending on seat version, is
mounted to the seat frame.
2
2
4
3
1
3
3